Ducati 848, 1098, 1198 AiM Solo 2 DL & EVO4S Logger Plug & Play Cable
Ducati 848, 1098, 1198 AiM Solo 2 DL & EVO4S Logger Plug & Play Cable
Ducati 848, 1098, 1198 AiM Solo 2 DL & EVO4S Logger Plug & Play Cable
Ducati 848, 1098, 1198 AiM Solo 2 DL & EVO4S Logger Plug & Play Cable
Ducati 848, 1098, 1198 AiM Solo 2 DL & EVO4S Logger Plug & Play Cable
Ducati 848, 1098, 1198 AiM Solo 2 DL & EVO4S Logger Plug & Play Cable

Ducati 848, 1098, 1198 AiM Solo 2 DL & EVO4S Logger Plug & Play Cable

8000 EUR (fara TVA)
9520 EUR (TVA inclus)
TVA inclus; Costurile de livrare nu sunt incluse. Preturile pot varia in functie de furnizor. Pretul final este afisat pe proforma sau ne puteti contacta.
Disponibil in 7-10 zile de la comanda
Comenzi telefonice - 07217224640721722464
Cod produs - SKU: V02569170

Descriere

Ducati 848, 1098, 1198 AiM Solo 2 DL & EVO4S Plug & Play Cable

The AiM ECU plug & play cable has been specifically designed for Ducati bikes. Allowing easy installation to a Solo 2 DL and EVO4S Data Logger. With a 7-pin 712 male binder connection.

Key Features :

Ducati plug & play cable 7 pin - 712 male binder connection
Receive data Suitable for Solo 2 DL & EVO4S Data Logger

Cable for:

  • Ducati 848, 1098, 1198
  • Ducati 899, 959, 1199, 1299 Panigale
  • Ducati Hypermotard 796, Multistrada 1200

Ducati Plug & Play ECU Cable

The AiM ECU plug & play cable has been specifically designed for the Ducati bike. This plug & play cable can be used for the Solo 2 DL and EVO4S Data Logger.

The cable is an easy fitment to your bike and allows ECU data to be logged. 

Please Note: If you are unsure this ECU cable will fit your bike, don't hesitate to contact one of our team. Either by email, phone or online chat.

Plug & Play

The plug & play cable currently fits the following Ducati bike models:

848 Base/EVO/EVO Corse - 2007-2013 1098 Base/S/S Tricolore/R - 2007-2009
1198 Base/S/S Corse/R Corse/SP - 2009-2011

Example data protocols

Example data protocols sampled include RPM, Active gear, Vehicle speed, Front wheel speed, Rear wheel speed warning led, Engine coolant temperature, Brake pressure, Throttle position, Speed, ABS intervention, ALC intervention, Low fuel level, Traction control, Oil pressure, Map menu and many more. Refer to the technical sheet in the Downloads Tab for an extensive protocol list.

Please Note: For these models/years Aim recommends not to remove the stock dash. Doing so will disable some of the bike functions or safety controls.

Expand Your System

These are some of the items that can be added to your bike for incrementing performance and data.

Technical


  • Below is a pinout drawing for the Ducati 848, 1098, 1198 plug & play connection cable